Our products
Description
Two outputs
AC The main output has an uninterrupted power supply function. In the event of a grid failure or the disconnection of shore or generator power, the MultiPlus takes over supplying the connected loads. This transfer is so fast (less than 20 milliseconds) that the operation of computers or other sensitive electronic equipment connected will not be disrupted.
The second output is only energized when AC is available on one of the MultiPlus inputs. Loads that will not discharge the battery, such as a water heater for example, can be connected to this output (second output available on models of 3 kVA and above).
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to obtain more output power. For example, six 24/5000/120 units will provide an output power of 25 kW / 30 kVA and a charging capacity of 720 A.
Three-phase configuration
In addition to parallel connection, three units of the same model can be configured for a three-phase output. But that's not all: up to 6 sets of 3 units can be connected in parallel to provide a power of 75 kW / 90 kVA and more than 2000 A of charging capacity.
PowerControl – Adapt to the limits of a generator, dock, or mains
The MultiPlus features a very powerful battery charger that draws high currents from shore or generator connections (nearly 10 A at 230 VAC per 5 kVA Multi). The Multi Control panel allows limiting the power to be supplied by the dock or the generator. The MultiPlus then takes into account the power demand from other AC loads at the output and will only use the excess for charging, thus avoiding any overload of the shore or generator supply.
PowerAssist – More power supplied by the dock or generator
This function adds an extra dimension to the PowerControl principle by allowing the MultiPlus to supplement the capacity of the alternative source. If a high peak power demand is required for a short duration, the MultiPlus ensures that the power shortage from the mains or generator is immediately compensated by energy from the battery. And when the demand decreases, the excess power will be used to recharge the batteries.
Solar energy.
AC power available even in the event of a grid failure The MultiPlus can be used both off-grid and connected to a PV grid or other alternative energy systems. A grid loss detection software is available.
System configuration
- For standalone applications, settings can be changed in minutes using the DIP switch configuration procedure.
- Parallel or three-phase configuration applications can be configured with the VE.Bus Quick Configure and VE.Bus System Configurator software.
- Self-consumption, grid-interactive, and off-grid applications involving grid-tied converters and/or MPPT solar chargers can be configured with assistants (specific software for specific applications).
On-site monitoring and control
Several options are available: battery monitor, a MultiControl panel, VE.Net Blue Power panel, Color Control panel, Smartphone or tablet (Bluetooth Smart), desktop or laptop computer (USB or RS232).
Remote monitoring and control
Victron Ethernet Remote, Venus GX and the Color Control panel. Data can be stored and displayed on our free VRM (Victron Remote Management) website.
Remote configuration
If systems with a Color Control panel are connected via Ethernet, they can be accessed and their configuration modified.
Convertisseur
Converter typePure Sine
Continuous power4000W
Peak power10000W
V - Continuous power at 40°C
---3700W
V - Continuous power at 60°C3000W
AC output voltage230VAC
Frequency50 Hz
Efficience max.94%
No-load consumption30W
General Features
Marque ENVictron Energy
Standard AC outletsM6 Bolts
Battery voltage24V
ProtectionsShort circuit at output, Overload, Battery voltage too high, Battery voltage too low, Temperature too high
Voltage range19V - 33V
V - Programmable relayYes
Operating temperature-40 to +65 °C (fan cooling)
V - VE.Bus communication portFor parallel or three-phase operation, remote monitoring, and system integration
V - Material and colorMaterial and Color in aluminum (RAL 5012 blue)
V - Battery connection4 M8 bolts (2 positive connections and 2 negative connections)
V - Degree of protectionIP21
Humidity (non-condensing)95%
Parallel and three-phase operationYes
V - Automatic transfer switch100A
Dimensions H x L x P444 x 328 x 240 mm
Net weight (kg)32
Garantie Fabricant5 years
Store Warranty2 years
CertificatesEN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1
Charger
AC Input187-265 VCA
Charging voltage « absorption »28.8V
Charging voltage « Float »27.6V
Storage mode26.4V
Rated charging current120A
Battery temperature sensorYes
Configurator
Compatible with ShadingNo
Popular products from category
