VE.Direct LoRaWAN US902-928

 Gain autonomy and keep an eye on your Victron installation remotely, without a subscription.
 Connect your BMV, MPPT charge controller or Phoenix inverter to the free Victron Remote Management (VRM) portal, from anywhere.

⚡ How does the VE.Direct LoRaWAN US902-928 module work?

1. Plug the module into the VE.Direct port of your BMV, MPPT, or Phoenix
2. The module is powered by the connected Victron device
3. The LoRaWAN link (US902-928 MHz band) is activated and sends hourly data packets
4. Key data (battery voltage, state of charge, PV power, etc.) are automatically sent to VRM
5. Access the VRM dashboard on a computer or smartphone
6. Track your history, configure alerts, share access
7. Stay informed even outside of regular cellular coverage, via a long-range low-bandwidth network
8. Extend the range with your own gateway if necessary.

⚡ Advantages of the VE.Direct LoRaWAN US902-928 module

A simple module that opens the door to remote monitoring of your Victron equipment, with no recurring costs.

The long-range LoRaWAN network transmits updates every hour, consuming very little power. You can check the battery status, solar production, and inverter activity from the clear and free VRM portal.

Whether in an off-grid site, a van, on a boat, or at a secondary residence, you maintain control over your system and can react as soon as a threshold is triggered.

⚡ Why choose the VE.Direct LoRaWAN US902-928 module?

For reliable, simple, and economical monitoring of your Victron energy system, without a SIM card or Wi-Fi on site.

Installation is limited to a VE.Direct connection. The VRM portal displays your useful graphs and alerts, accessible from anywhere.

In areas with poor coverage, LoRaWAN extends the radio range and allows for the addition of a private gateway when public coverage is lacking.

It is the pragmatic solution for monitoring a battery bank, optimizing solar usage, and protecting your critical equipment.

⚡ Technical Specifications

• Connectivity: 1x VE.Direct port (to BMV / MPPT / Phoenix)
• Network: LoRaWAN US902-928 MHz (long range, very low power consumption)
• Telemetry: hourly updates to VRM
• Portal: free Victron Remote Management (VRM), web & mobile access
• Subscription: none required for LoRaWAN; private gateway possible in the absence of coverage

⚡ Compatible Equipment

The module communicates with BMV battery monitors ( 700 and 712 Smart series), the SmartShunt, MPPT solar charge controllers, and Phoenix inverters equipped with a VE.Direct port.

In use, you can view the state of charge of an AGM or LiFePO₄ battery bank, the instantaneous production from your panels, the consumption of a 12 V refrigerator, a pump, or a 230 V inverter.

As a secondary benefit, you maintain continuous monitoring during extended absences, whether in a van, on a boat, or at an off-grid site.

⚠️ Safety Information

Read and follow the instructions in the user manual carefully.
Use only on Victron devices with a VE.Direct port.

Allo Solar – Official Victron Energy Reseller

 ALLO SOLAR supports you: expert advice, guaranteed compatibility with your Victron equipment, responsive customer service, and sustainable solutions for residential self-consumption and mobile use.