100A Charge Regulator - PV Input 450V - MPPT RS 450/100 MC4 - Isolated - Victron Energy

Description

The SmartSolar MPPT RS charge controllers are Victron solutions for large PV array systems connected in series and charging 48 V DC battery banks. This product is ideal for large grid-connected or off-grid battery systems.

Models available in 5.76 kW and 11.52 kW; features include a wide solar input voltage range operating on 80-450 VDC, independent tracker inputs, full connectivity, isolated PV connections, a display screen, fully programmable charge settings, and an active cooling system. The new metal chassis design and fully shrouded electrical connections enhance safety and modernize the appearance in line with the latest Victron product series.

MPPT: ultra-fast maximum power point tracking.

The SmartSolar RS charge controller can be connected to a PV array from 80 to 450 V Voc, and it can efficiently charge your 48 V battery bank with 100 A or 200 A. Charge settings are fully programmable and can be configured for different battery chemistries: lead-acid, lithium, and more.

Configuration and monitoring with VictronConnect

The SmartSolar RS charge controller can be remotely controlled and configured via Bluetooth with the VictronConnect app. The app allows for device configuration, management, and quick access to data such as battery voltage and current, PV voltage and current, and data history and trends.

Adding units installed in series

The SmartSolar RS charge controller is equipped with VE.Can bus ports. These allow communication with additional SmartSolar RS and VE.Can MPPT units. Additional units are simply daisy-chained together with an RJ45 cable.

When connected to each other, all individual chargers will synchronize their charging stages. For monitoring purposes, they can also send their data over the same cable to a GX device (e.g., a Cerbo GX).

Remote monitoring and control

If the GX device is connected to the Internet, the Victron Remote Management Portal (VRM) provides you with access to the full power of your SmartSolar RS charge controllers.

If your installation is connected to a GX device and the Internet, the Victron Remote Management Portal (VRM) provides you with access to the full power of your MPPT, anytime, anywhere, for free;

For remote installations – even if there is no internet connection nearby – you can monitor your MPPT by connecting the GlobalLink 520.

SmartSolar Display

The front of the SmartSolar RS charge controller is equipped with a display. The display shows volts, charge current, and battery voltages for both arrays individually, including current and total figures, as well as the unit's status and any error codes.

I/O Connections

The SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept Victron's smallBMS as well as other types of BMS with "Charge-Enable" signals.