Our products
Description
Two outputs
AC The main output has an uninterrupted power supply function. In the event of a grid failure or disconnection of shore or generator power, the MultiPlus takes over powering the connected loads. This transfer is so fast (less than 20 milliseconds) that the operation of computers or other sensitive electronic equipment connected will not be disturbed.
The second output is only energized when AC is available on one of the MultiPlus inputs. Loads that will not discharge the battery, such as a water heater for example, can be connected to this output (second output available on models of 3 kVA and above).
Virtually unlimited power thanks to parallel operation
Up to 6 Multi can operate in parallel to obtain more output power. For example, six 24/5000/120 units will provide an output power of 25 kW / 30 kVA and 720 A of charging capacity.
Three-phase configuration
In addition to parallel connection, three units of the same model can be configured for a three-phase output. But that's not all: up to 6 series of 3 units can be connected in parallel to provide a power of 75 kW / 90 kVA and more than 2000 A of charging capacity.
PowerControl – Adapt to the limits of a generator, shore or mains power
The MultiPlus features a very powerful battery charger that draws high currents from shore or generator connections (nearly 10 A at 230 V AC per 5 kVA Multi). The Multi Control control panel allows limiting the power to be supplied by the shore or generator. The MultiPlus then takes into account the power demand from other AC loads and will only use the excess for charging, thus avoiding any overload of the shore or generator supply.
PowerAssist – More power supplied by the shore or generator
This function adds an extra dimension to the PowerControl principle by allowing the MultiPlus to supplement the capacity of the alternative source. If a high peak power demand is required for a short duration, the MultiPlus ensures that the lack of mains or generator power is immediately compensated by energy from the battery. And when the demand decreases, the excess power will be used to recharge the batteries.
Solar energy.
AC power available even in the event of a grid failure The MultiPlus can be used both off-grid and connected to a PV grid or other alternative energy systems. A grid loss detection software is available.
System configuration
- For standalone applications, parameters can be changed in minutes using the DIP switch configuration procedure.
- Parallel or three-phase configuration applications can be configured with the VE.Bus Quick Configure and VE.Bus System Configurator software.
- Self-consumption, grid-interactive and off-grid applications involving grid-tied converters and/or MPPT solar chargers can be configured with assistants (specific software for specific applications).
On-site monitoring and control
Several options are available: battery monitor, MultiControl control panel, VE.Net Blue Power control panel, Color Control control panel, Smartphone or tablet (Bluetooth Smart), desktop or laptop computer (USB or RS232).
Remote monitoring and control
Victron Ethernet Remote, Venus GX and Color Control control panel. Data can be stored and displayed on our free VRM (Victron Remote Management) website.
Remote configuration
If systems with a Color Control panel are connected via Ethernet, they can be accessed and their configuration modified.
Convertisseur
Converter typePure Sine
Continuous power2400W
Peak power6000W
V - Continuous power at 40°C
---2200W
V - Continuous power at 60°C1700W
AC output voltage230VAC
Frequency50 Hz
Efficience max.93%
No-load consumption20W
General Features
Marque ENVictron Energy
Standard AC outletsVis bornes 13 mm2 (6 AWG)
Battery voltage12V
ProtectionsCourt-circuit en sortie ,Surcharge,Tension de batt. trop élevée, Tension de batt. trop faible, Température trop élevée
Battery typeCompatible avec les batteries au lithium-ion
Voltage range9.5V - 17V
V - Programmable relayOui
Operating temperature-40 à +65 °C (refroidissement par ventilateur)
V - VE.Bus communication portPour un fonctionnement en parallèle ou triphasé, suivi à distance et intégration du système
V - Material and colorMatériel et Couleur en aluminium (bleu RAL 5012)
V - Battery connection4 boulons M8 (2 connexions positives et 2 négatives)
V - Degree of protectionIP21
Humidity (non-condensing)95%
V - Automatic transfer switch16A
Dimensions H x L x P362 x 258 x 218 mm
Net weight (kg)18.85
Garantie Fabricant5 years
Store Warranty2 ans
CertificatesEN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1
Charger
AC Input187-265 VCA
Charging voltage « absorption »14.4V
Charging voltage « Float »13..8V
Storage mode13.2V
Rated charging current120A
Battery temperature sensorOui
Configurator
Compatible with ShadingNo
Popular products from category
