• Low battery voltage alarm
• Low battery voltage reset and cut-off levels.
• Dynamic cut-off: cut-off level dependent on the load
• Output voltage: 210 – 245 V
• Frequency: 50 Hz or 60 Hz
• ECO mode detection level and ECO mode on/off
• Alarm relay
Input and output voltage, load and alarms
The VE.Direct port can be connected to a computer (VE.Direct-USB interface cable required) to configure and
monitor the same parameters
For our low-power inverters, we recommend using our Filax automatic transfer switch. The Filax has a very fast transfer time (less than 20 milliseconds) so that computers and other electronic equipment can continue to operate without interruption. Otherwise, please use a MultiPlus equipped with an integrated transfer switch.
The inverters are protected against short circuits and overheating, whether due to overload or high ambient temperature.
Required to start loads such as power converters for LED bulbs,
halogen lamps or power tools.
In ECO mode, the inverter will switch to standby if the load drops below a predetermined value.
Once in standby, the inverter will turn on for a short period of time every 2.5 seconds (adjustable).
If the load exceeds the pre-set level, the inverter will remain on.