Our products
Description
VE.Direct communication port
The VE.Direct port can be connected to:
- A computer (VE.Direct-USB interface cable required).
- Apple and Android smartphones, tablets, MacBooks and other devices (a Bluetooth Smart dongle that communicates with VE.Direct is required).
Fully configurable:
- Low battery voltage alarm reset and threshold levels
- Low battery voltage restart and reset levels
- Dynamic reset: reset threshold as a function of the load
- Output voltage 210 - 245 V
- Output frequency 50 Hz or 60 Hz
- ECO mode sensing and ECO mode on/off
Monitoring:
- Input and output voltage, load percentage and alarms
Proven reliability
The full-bridge topology with a toroidal transformer has proven its reliability over many years. The inverters are protected against short circuit and overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start up loads such as power converters for LED lamps, halogen bulbs or power tools.
ECO mode
In ECO mode, the inverter will switch to standby if the load drops below a preset level (minimum load: 15 W). Once in standby, the inverter will switch on for a short period of time (adjustable; default: every 2.5 seconds). If the load rises above a preset level, the inverter will switch on again.
Remote on/off.
A remote on/off switch can be connected to a two-pole connector, or between the positive pole of the battery and the left contact of the two-pole connector.
Diagnostic LED
Please consult the manual for a description.
To transfer the load to another AC source: the automatic transfer switch
For our low-power inverters, we recommend the use of our automatic transfer switch Filax. The Filax has a very fast transfer time (less than 20 milliseconds) so that computers and other electronic equipment can continue to operate without interruption.
Inverter
Converter typePure Sine
Continuous power200W
Peak power400W
V - Continuous power at 40°C
---175W
AC output voltage230 VCA ou 120 VCA +/- 3 % (réglable)
Frequency50 Hz
Efficience max.87%
No-load consumption4.2W
V - No-load consumption ECO mode0.8W
Configurator
Compatible with ShadingNo
CARACTéRISTIQUES GENERAL
Marque ENVictron Energy
Standard AC outletsSchuko FR
Battery voltage12V
ProtectionsCourt-circuit en sortie /surcharge /tension de batterie trop élevée /tension de batterie trop faible /température trop élevée
Voltage range9.2V- 17V
V - Low battery restart10.9V
V - Charged battery detection14V
Operating temperature-40 à +65°C (refroidissement par ventilateur)
V - Material and colorChâssis en acier et couverture en plastique (Bleu RAL 5012)
V - Battery connectionBornes à vis
V - Maximum cable cross-section10 mm² / AWG8
V - Degree of protectionIP21
Humidity (non-condensing)95%
Remote on/off switchOui
V - Automatic transfer switchFilax
Dimensions H x L x P86 x 165 x 260 mm
Net weight (kg)2.6
Garantie Fabricant5 years
Store Warranty2 ans
CertificatesEN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Popular products from category
