AC 6KW 32A Type B Box + Backup Protection - Technideal

This Technideal AC 6KW 32A Type B + Back-Up Protection box is essential for ensuring the safety and proper functioning of your photovoltaic installation equipped with a hybrid inverter without galvanic isolation (Sofar HYD, Fronius, ...).

It ensures the protection of your inverter, your home network, and associated lithium-ion batteries, while allowing efficient energy management in the event of a power outage.

Equipped with a Type B differential switch to comply with standard UTE 15-712-3, which specifies it is mandatory for the protection of installations equipped with Lithium batteries and a hybrid inverter without galvanic isolation.

Box contents:

• 1 UV-resistant ABS box with a reversible transparent door
• 1 x ID Inter Diff 40A 30mA Type B 2 Pole
• 1 x ID Inter Diff 40A 30mA Type Ai 2 Pole
• 1 x Contactor KM1 NO
• 1 x Circuit Breaker DPN 2A 2 Pole Curve C
• 2 x Circuit Breakers DPN 32A 2 Pole Curve C
• 1 x Circuit Breaker DPN 20A 2 Pole Curve C
• 1 x Surge Protector TYPE 2

Key Features

• Neutral-to-ground switch in standalone mode
• Automatic relay and backup mode in case of power outage
• Safe disconnection of the photovoltaic system from the grid in case of failure
• Provides backup power in case of power outage
• Protects the inverter and the home network from surges and failures

Automatic power management in case of grid outage

In the event of a power outage, the batteries integrated into your photovoltaic installation take over and provide backup power to your home. This feature is similar to that of a dedicated backup power line, ensuring vital energy continuity.

When a power outage is detected, the switching box safely disconnects the photovoltaic system from the electrical grid. This prevents dangerous power feedback. The switching box also provides backup power to your home from the battery bank.

This ready-to-connect and pre-tested solution is simple to install and use. It allows you to benefit from reliable and safe backup power in the event of a power outage.

Compliance Standards:

This box complies with standard UTE 15-712-3, which requires the use of a Type B residual current device for the protection of installations equipped with lithium-ion batteries and having a hybrid inverter without galvanic isolation. This standard aims to ensure the safety of photovoltaic installations.