Our products
Description
The SmartSolar MPPT charge controller with VE.Can uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery bank.
Models:
12/24/36/48 Volt
MPPT: ultra-fast maximum power point tracking.
The SmartSolar MPPT charge controller with VE.Can can be connected to a 150 or 250 V Voc PV array: it will automatically detect and charge a 12, 24, or 48 V battery bank with a current of 70 to 100 A depending on the model.
The charge parameters are fully programmable, and they can even be set for different types of battery chemistries, such as lead-acid, lithium, and others.
Control your charger remotely
The SmartSolar MPPT charge controller with VE.Can can be controlled and configured remotely via Bluetooth with the VictronConnect app. This allows you to configure the device, manage it, and get data at a glance, such as battery voltage and current, PV voltage and current, and historical data.
Add units installed in a daisy chain
The SmartSolar charge controller with VE.Can is equipped with CAN bus ports. They allow communication with other SmartSolar charge controllers with VE.Can. Additional units are simply daisy-chained to each other with a single RJ45 cable between each unit.
When connected to each other, all individual SmartSolar VE.Can charge controllers will synchronize according to their charging stages. They can also send their data, via a simple cable, to a GX monitoring device.
Remote monitoring and control
If the GX device is connected to the Internet, the Victron Remote Management Portal (VRM) will provide access to the full power of your solar charge controller(s).
SmartSolar control screen
The SmartSolar VE.Can charge controller is equipped with a VE.Direct port like our MPPT solar charge controllers. This port can be used for a simple monitoring unit or to control a street light. The remote on/off switch connector can be controlled externally by a third-party device, such as a lithium battery. An optional integrated LCD display/control panel transmits live data, allows system configuration and management directly from its front panel.
CARACTéRISTIQUES
Marque ENVictron Energy
Regulator typeMPPT
Battery voltage12V / 24V / 48V
Rated charging current70A
Rated PV power, 12 V1000W
PV rated power, 24V2000W
Nominal PV power, 48 V4000W
Max. PV short-circuit current35A
Maximum PV open-circuit voltage250 V absolute maximum under coldest conditions 245 V maximum for startup and operation
Peak efficiency99%
Self-consumptionLess than 35 mA @ 12 V / 20 mA @ 48 V
Tension de charge « d'absorption »Default configuration: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable: rotary selector, display, VE.Direct or Bluetooth)
Float charging voltage « float »Adaptive multi-stage
Charging algorithm-16 mV / -32 mV / -64 mV / °C
ProtectionPV reverse polarity / Output short circuit / Overheating
Operating temperature-30 to +60° C (rated output power up to 40° C )
Remote control panelYes (two-pole connector)
Humidity95%, non-condensing
Data communication portVE.Can, VE.Direct and Bluetooth
Parallel operationYes, synchronized parallel operation with VE.Can, VE.Direct or Bluetooth
Dimensions H x L x P185 x 250 x 95 mm
Net weight (kg)3
Configurator
Compatible with ShadingNo
Box Features
Power terminals35 mm² / AWG2
PV Terminals35 mm² / AWG2
Degree of protectionIP43 (electronic components), IP22 (connection area)
Garantie Fabricant5 years
Store Warranty2 ans
CertificatesEN/IEC 62109
Popular products from category
