70A MPPT 150/70 Tr VE.CAN Smart Charge Controller - Victron Energy

Description

The MPPT SmartSolar charge controller with VE.Can uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery bank.

Models:
12/24/36/48 Volt

MPPT: Ultra-fast maximum power point tracking.

The MPPT SmartSolar charge controller with VE.Can can be connected to a PV array of 150 or 250 V Voc: it will automatically detect and charge a 12, 24, or 48 V battery bank with a current ranging from 70 to 100 A depending on the model.

The charge settings are fully programmable, and they can even be set for different types of battery chemistries, such as lead-acid, lithium, and others.

Control your charger remotely

The MPPT SmartSolar charge controller with VE.Can can be remotely controlled and configured via Bluetooth with the VictronConnect app. This allows you to configure the device, manage it, and get data at a glance, such as battery voltage and current, PV voltage and current, and historical data.

Adding daisy-chained installed units

The SmartSolar charge controller with VE.Can is equipped with CAN bus ports. They allow communication with other SmartSolar charge controllers with VE.Can. Additional units are simply daisy-chained to each other with a single RJ45 cable between each unit.

When connected to each other, all individual SmartSolar VE.Can charge controllers will synchronize according to their charging stages. They can also send their data, via a single cable, to a GX monitoring device.

Remote monitoring and control

If the GX device is connected to the Internet, the Victron Remote Management Portal (VRM) will provide access to the full power of your solar charge controller(s).

SmartSolar control panel

The SmartSolar VE.Can charge controller is equipped with a VE.Direct port like our MPPT solar charge controllers. This port can be used for a simple monitoring unit or to control a street light. The remote on/off switch connector can be controlled externally by a third-party device, such as a lithium battery. An optional integrated LCD display/control panel transmits live data, allows system configuration and management directly from its front dial.