Inverters allow you to power household equipment — requiring a 230V/120V AC power source — from batteries with a voltage of 12V, 24V or 48V DC, such as 'leisure' or 'automotive' batteries.
VE.Direct communication port
The VE.Direct port can be connected to:
- Computers (VE.Direct to USB interface cable needed).
- Apple and Android smartphones, tablets, MacBooks and other devices
(a Bluetooth Smart dongle that communicates with VE.Direct is needed).
Fully configurable:
- Low battery voltage alarm reset level and threshold
- Low battery voltage reconection level and hysteresis
- Dynamic cut-off: cut-off threshold as a function of the load
- Output voltage 210 - 245 V
- Output frequency 50 Hz or 60 Hz
- ECO mode sensing on/off and ECO mode on/off threshold
Monitoring:
- Input and output voltage, load percentage and alarms
Proven reliability
The full bridge topology with a toroidal transformer has been proven in industry for many years. The inverters are protected against short circuit and overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start up high loads, such as power converters for LED- and halogen bulbs, power tools and the like.
ECO mode
In ECO mode, the inverter will switch to standby whenever the load drops below a preset value (minimum load: 15 W). Once in standby, the inverter will switch on for a short period of time (adjustable; default: every 2.5 seconds). If the load exceeds the preset level, the inverter will switch on again.
Remote on/off.
A remote on/off switch can be connected to a two-pole connector, or between the positive pole of the battery and the left contact of the two-pole connector.
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters, we recommend the use of our automatic transfer switch Filax. The Filax has a very short transfer time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate uninterrupted.