250VA 12V Phoenix VE.Direct Converter - SCHUKO - Victron Energy

Description

VE.Direct communication port
The VE.Direct port can be connected to:

• A computer (VE.Direct-USB interface cable required).
• Apple and Android smartphones, tablets, MacBooks and other devices (a Bluetooth Smart dongle that communicates with VE.Direct is required).

Fully configurable:

• Low battery voltage alarm reset and threshold levels
• Low battery voltage restart and reset levels
• Dynamic reset: reset threshold as a function of the load
• Output voltage 210 - 245 V
• Output frequency 50 Hz or 60 Hz
• ECO mode sensing and ECO mode on/off

Monitoring:

• Input and output voltage, load percentage and alarms

Proven reliability
The full-bridge topology with a toroidal transformer has proven its reliability over many years. The inverters are protected against short circuit and overheating, whether due to overload or high ambient temperature.

High start-up power
Needed to start up loads such as power converters for LED lamps, halogen bulbs or power tools.

ECO mode
In ECO mode, the inverter will switch to standby if the load drops below a preset level (minimum load: 15 W). Once in standby, the inverter will switch on for a short period of time (adjustable; default: every 2.5 seconds). If the load rises above a preset level, the inverter will switch on again.

Remote on/off.
A remote on/off switch can be connected to a two-pole connector, or between the positive pole of the battery and the left contact of the two-pole connector.

Diagnostic LED
Please consult the manual for a description.

To transfer the load to another AC source: the automatic transfer switch
For our low-power inverters, we recommend the use of our automatic transfer switch Filax. The Filax has a very fast transfer time (less than 20 milliseconds) so that computers and other electronic equipment can continue to operate without interruption.