Our Products
Description
Built-in Bluetooth Smart: no need for an electronic key
The wireless solution for configuring, monitoring, and updating the controller using Apple and Android phones, tablets, or other devices.
VE.Direct
For wired data connection to a Color Control panel, a PC, or other devices.
Ultra-fast maximum power point tracking (MPPT).
Especially in cloudy weather, when light intensity constantly changes, an ultra-fast MPPT controller will improve energy collection by up to 30% compared to PWM (pulse width modulation) charge controllers, and up to 10% compared to slower MPPT controllers.
Load output
Excessive battery discharge can be avoided by connecting all loads to the load output.
The load output will disconnect the load when the battery has been discharged to a predetermined voltage.
Otherwise, a smart battery management algorithm can be selected: see Batterylife. The load output is protected against short circuits.
Battery Life: smart battery management
When a solar charge controller cannot fully recharge the battery in one day, the battery often alternates between a “partially charged” state and a “discharged” state. This operating mode (irregular full recharge) will damage lead batteries within a few weeks or months.
The Batterylife algorithm will monitor the battery’s charge state and, if necessary, slightly increase the disconnect level of the load day by day (i.e., it will disconnect the load earlier), until the solar energy produced is sufficient to recharge the battery to nearly 100% of its capacity. From then on, the load disconnect level will be adjusted so that a recharge to nearly 100% is achieved at least once a week.
Programmable battery charge algorithm
See the Downloads > Software section on our website for more details.
Night/Day option and lighting dimmer
See the Downloads > Software section on our website for more details.
History display options and real-time data, programming
Modern Apple and Android smartphones, tablets, MacBooks, and other devices: see the screenshots on the MPPT and VE.Direct Bluetooth Smart app discovery sheet.
ColorControl panel
CARACTéRISTIQUES
MarqueVictron Energy
Type de régulateurMPPT
Tension de batterie12V / 24V
Courant de charge nominal15A
Puissance nominale PV, 12 V220W
Puissance nominale PV, 24V440W
Max. PV courant de court-circuit15A
Déconnexion de charge automatiqueOui, charge maximale 15 A
Tension PV maximale de circuit ouvert100V
Efficacité de crête98 %
Autoconsommation10 mA
Tension de charge « d'absorption »14.4V / 28.8V (réglable)
Tension de charge « float »13.8V / 27.6V (réglable)
Algorithme de chargeAdaptative à étapes multiples
Compensation de température-16 mV / °C resp. -32 mV / °C
Courant de charge continu/de crête15A
Déconnexion en cas de charge de tension réduite11.1V / 22.2V ou 11.8V / 23.6V ou Algorithme Battery Life
Reconnexion de charge en cas de tension réduite13.1V / 26.2V ou 14V / 28V ou Algorithme Battery Life
ProtectionPolarité inversée de batterie (fusible) / Court-circuit de sortie / Surchauffe
Température d'exploitation-30 à +60°C (puissance nominale en sortie complète jusqu'à 40°C)
Humidité95 %, sans condensation
Port de communication de donnéesVE.Direct
Dimensions H x L x P100 x 113 x 50 mm
Poids net (kg)0.55
Configurator
Compatible with ShadingNo
Box Features
Bornes de puissance6 mm² / AWG10
Degré de protectionIP43 (composants électroniques), IP22 (zone de connexion)
Garantie Fabricant5 ans
Garantie Magasin2 ans
CertificatsEN/IEC 62109-1
Popular products from category
