1200VA 12V Phoenix VE.Direct Converter - SCHUKO - Victron Energy

Description

VE.Direct communication port

The VE.Direct port can be connected to:

• A computer (VE.Direct-USB interface cable required).
• Apple and Android smartphones, tablets and other devices (a Bluetooth Smart dongle communicating with VE.Direct is required).
• Fully configurable
• Reset levels and alarm trigger on low battery voltage
• Restart and shutdown levels on low battery voltage, or Dynamic Cut-off
• Output voltage 210 - 245 V
• Output frequency 50 Hz or 60 Hz
• ECO mode sense level and ECO mode on/off

Monitoring

Battery voltage, AC output voltage, charge indicator, alarms

Proven reliability

The full-bridge topology with a toroidal transformer has proven its reliability over the years.
The inverters are protected against short circuits and overheating, whether due to overload or high ambient temperature.

High start-up power

Required to start up loads such as power converters for LED lamps, incandescent lamps or power tools.

ECO mode

In ECO mode, the inverter will switch to standby if the load drops below a predetermined value. It will then switch on and check every X seconds (adjustable), if the load has increased again.

Remote On/Off switch

A remote on/off switch can be connected to a two-pole connector or between the positive battery terminal and the left contact of the two-pole connector.

Diagnostic LED

A red and a green LED indicate the inverter's operation and the status of the various protections.